Key safe with code including wall mounting - grey

All safes are made of metal and also have a metal locking mechanism. This makes them extra sturdy and less susceptible to defects than plastic versions.

Setting the new code for the key box is very easy. In the following four simple steps we explain how to set and reset the code:

1) Once you get the locker you can open it with the code 0000 (four times 0). The key box will now open.
2) On the inside of the key box there is a switch/button that can be pressed from top to bottom. Press this switch from A to B (push it to the side it is not currently on).
3) Now enter the correct code you want to use into the safe.
4) Now push the switch on the inside of the safe back to its original position.

This is all you need to do to set up the locker with combination lock properly. If you want to change the code later, you can do it in exactly the same way.

If the explanation is not entirely clear, please also take a look at our images. There is a visual indication of where the switch is located and the 4 steps are visually displayed.

Mounting the key safe with code for outside is very easy. In principle, it can be mounted on any wall, or even in a fence. In addition, all materials for mounting the key safe with code are included!

You can easily install the key cabinet by following these four steps:

1) Mark the drill holes in the correct place where you want to hang the outdoor key box with code.
2) Drill the holes in the wall
3) Insert screw plugs into the drill holes
4) Place the outdoor key safe with the back against the wall where you drilled the holes and screw the safe through the holes in the back.

This is all you need to do to securely fasten the locker with combination lock.

If after reading the above steps it is still not completely clear, take a look at the images. There is also an image in which the steps are visually elaborated.

The key safe is large enough for 5-7 keys. Please note: car keys usually do not fit in the key safes.