RGB Fan PC case fan - 120mm 4-pin - white

"The case fan has a speed of up to 1200 RPM and an airflow of up to 64.5 m3/h. This will cool your case well so that you can always perform at the top. In addition to spectacular lighting effects, you also have super performance with the RGB case fan from Earkings.

This smart case fan has a self-regulating system and will automatically ventilate harder or softer as the temperature in your case increases or decreases."

Each case fan 120mm has no less than 16 different LEDs, which makes the colors come into their own. Thanks to the large number of LEDs, it is possible to set a beautiful color transition that goes smoothly from color to color. It is also possible to set all 16 LEDs to the same color at the same time.

"This RGB case fan 120mm from Earkings has no less than 12 different colors that can be set separately (for example the fixed color red) and can be set in an overflow of all twelve colors. The different colors are:

White
Red
Neon red
Orange
Yellow
Lime green/poison green
Green
Turquoise
Light blue
Blue
Purple
Pink

The colours can be set via any RGB software on your computer or with a remote control. This remote control is not included as standard in this fan but is in our range. Look for this between our products.

Because the case fan is connected directly to the motherboard, there is no need for a separate controller to connect the case fan. The case fan itself has these functionalities."

"The RGB fan is easy to connect with a 4-pin connection (fan) and a 3-pin connection (RGB lighting) directly on the motherboard. The length of the cables are 38 centimeters and 65 centimeters. This gives you enough leeway to neatly finish/hide the wiring in your computer case.

The case fan is connected with 2 cables, 1 cable for turning the fan and 1 cable for the RGB lighting. If only 1 cable is connected, either the fan will not turn or the LED lights will not turn on. So make sure that you check before purchasing whether you have both a 4-pin and 3-pin connection on your motherboard.

The case fan can be secured to the casing of your computer with 4 small screws. Once it is screwed in and you connect the cable, it is ready to use!

NOTE: This case fan cannot be connected with a 6-pin connector and therefore cannot be connected to a 6-pin controller/hub."